Power supply via a USB-C™ connection - BUS powered
No driver or software required - Configuration via the display settings in Windows OS
Supports 3 display modes: Mirror (1 signal mirrored on 3 displays), extend (3 signals on 3 displays), distribute (1 signal distributed across 3 displays)
HDCP 2.2 & 1.4
Supports HDR (High Dynamic Range)
Supports MST (Multi Stream Transport) & SST - Single Stream Transport
Housing: ABS
Operating temperature: 0-45 °
Standby power consumption: approx. 1W
Dimensions: L 26.3 x W 3.6 x H 1.15 cm
Weight: 55 g
Color: Black
Note:
To achieve the resolutions stated above, the host PC should support DP 1.4 (Alt mode). If your PC only supports DP 1.2, the corresponding resolutions are reduced due to the bandwidth restriction
The resolution combinations stated above are a theoretical reference, the actual resolutions depend the connected host PC as well as the display
In order to use the full scope of features, make sure that your device (graphics card) uses DP 1.4.
If you use a DisplayPort 1.1 graphics card, the MST Hub acts as a splitter and mirrors your video source on all displays
Functionality can be restricted depending on the specifications of your device and operating system
MST Hubs cannot increase the number of screens supported by a graphics card. Every graphics card has a limited number of screens that it can support. Please check your specifications in advance.
Requires at least a host system with DP1.2/HBR2/MST or higher (recommended)
Supports AMD, Nvidia and Intel graphics cards
Attributes
Audio: no
Package content
1x MST Video Hub (USB-C™ -> 3x HDMI)
1x QIG
TESLİMAT
Ürünü sipariş verdiğiniz gün saat 12:00 ve öncesi ise siparişiniz aynı gün kargoya verilir.Ve ertesi gün teslim edilir.
Eğer kargoyu saat 12:00`den sonra verdiyseniz ürününüzün stoklarda olması durumunda ertesi gün kargolama yapılmaktadır.